The CBH Tubing Bender Plans

The CBH Tube Bender plans have been without a doubt the most popular item we've ever published. So far these plans have been downloaded from our site a little over 8000 times and they have been posted on about six dozen other sites over the years. At one Machinist forum site alone they were downloaded over 2000 times so they must be fulfilling one of our promises which was to openly share information.

The Tube Bender package consists of the instruction fabrication booklet plus three large scale plan sheets all in Adobe pdf file format. You can copy the plan sheets to a disk and have them printed out full size at almost any office supply store or print shop that has a large format printer/plotter such as Kinko's for instance.

There are two sets of plans for the bender. One set is for the original JD2 bender which can be downloaded by 'right-clicking' the following links:

Plan Sheet Number 1

Plan Sheet Number 2

Plan Sheet number 3

The other plans are for our simplified 'Bend-O-Matic and the instruction booklet. To download the instruction booklet and the separate plan sheets just 'right-click' on the links below and select 'save-as' to your local hard drive.

Instruction Booklet 

Plan Sheet Number 1

Plan Sheet Number 2

Plan Sheet number 3

Plan Sheet number 4

Plan Sheet number 5

Plan Sheet number 6

 

 

| Main Page | Copyrights | Terms of Use | Warranty Disclaimer | Security and Privacy | Contact |

Copyright 2003-11, All Rights Reserved